In the processing of parts, those small parts such as bars need to be processed at one time, and those parts need to be processed in batches. In most cases, it will be used. Pogo Pin, Brass Threaded Inserts for Plastic, 316 stainless steel dowel pins, small appliances shafts, brass cable connectors and other round symmetrical products fall into this range, as long as it involves the processing of rod-like parts, as long as the diameter of the processed part is not When the diameter is too large (the diameter cannot be greater than 52mm), the CNC lathe has great advantages in all aspects. If coupled with the matching equipment-feeder (CNC CNC PRECISION AUTOMATIC LATHE), it will generally be used for distribution. Can have a greater advantage), so in terms of this set of equipment, it is a relatively typical small automated production line, whether it is in the speed of processing parts, the molding rate of the product or the cost of the entire production, It has advantages unmatched by other machine tools.

The biggest and most important difference between CNC PRECISION AUTOMATIC LATHE and the walking machine is that during the work of the walking machine, the knife moves while the workpiece does not move. CNC PRECISION AUTOMATIC LATHE has long been called a slitting machine in China. It is mainly used for batch processing of small rod-shaped parts. Most feeders pass the bar through the through hole of the spindle, and the collet is automatically clamped. If the parts that need to be processed in the processing process are protruding outward for a certain distance, then the parts need to be equipped with a tip. If the tail needs to be processed, a second spindle is required. If the machined parts need to be machined with four or six drill holes, then a power tool holder and spindle indexing are needed.

For CNC PRECISION AUTOMATIC LATHE, the biggest limitation is the limitation of the rod material diameter. At present, the largest type of center lathe can only process parts with a diameter of 50 mm. As long as it is a part that can be machined by CNC PRECISION AUTOMATIC LATHE, its machining accuracy, machining speed, and cutting machine can't match it. There are a lot of CNC PRECISION AUTOMATIC LATHE, but its main advantage is that one time clamping of the part can cut the part up to 200mm in length without stopping the spindle. If you need to process a relatively small part (10mm), both CNC PRECISION AUTOMATIC LATHE and the cutter can be used, but CNC PRECISION AUTOMATIC LATHE can do a lot of this small part without stopping the spindle, but the cutter cannot . The cutting position of CNC PRECISION AUTOMATIC LATHE in the cutting process is always the nearest position where the part is fixed, so the rigidity is very good.

The cutter can process more complex and irregular parts. For some flat plate seats that require grooves, the irregular and asymmetric CNC machining part cutter is more suitable than the CNC PRECISION AUTOMATIC LATHE.

Zhonglida machining co, .ltd has 60 ordinary lathes, which are used to process simple shaft and pin parts. It has the advantages of fast production speed and low cost. It has 30 CNC PRECISION AUTOMATIC LATHE. It has the advantages of fast processing speed, precise processing, and high precision requirements. With 20 cutters, it can process irregular parts. It has the advantages of customization, precise machining, and a wide variety of parts.